A water treatment system to eliminate contaminants, hard water, chlorine and other chemicals and odors bringing your water to a clean purified state, then customize your water to fit you needs!
The Water Dynamix water treatment system is the only system of its kind, providing purified mineralenriched water in a controlled environment. The patented system has state of the art technology to treat most water problems and provide a purified product. The end user can easily control mineral injection and pH of the purified water. The system enhances quality controls and establishes consistency of your water.
Filters the water supply to prevent sediment from injuring the water treatment system.
The purpose of the activated carbon is to remove chlorine and other disinfectant products found in source water as well as Volatile Organic Compounds (VOCs) if present. Removal of chlorine is crucial to the life of the reverse osmosis membrane. It also removes undesirable tastes and odors commonly found in source water.
Water treatment technology that uses a semipermeable membrane to remove ions, molecules and larger particles from drinking water.
The Anti-Scale unit is a Template Assist Crystallization unit designed to soften the water and inhibit scale formation in the Reverse Osmosis Membrane.
This patented water system is to further increase TDS in thewater to any level desired by the operator. Different customers may require different minerals or TDS levels. It is designed to be field adjustable to tailor the water to your specific needs. The mineral is injected into the water with precision to bring the resulting TDS to the desired level. The system constantly monitors the mineral content in the purified water and maintains the exact dissolved mineral mixture desired.
The pH balance feature is designed to reintroduce raw minerals to the purified reverse osmosis water to do two things: Increase the pH to 7.0 or above and replenish the water with valuable minerals.
This valve diverts waste water back to the booster pump to balance the water system and reduce the amount of water waste.
This component injects customizable amounts of dissolved minerals into the feed water, to maintain the desired TDS level.
This component controls the amount of minerals injected into the water. It senses the TDS of the water in real time, prior to going into the storage tank and adjusts the remineralization pump automatically to maintain the desired TDS range.
This component monitors the TDS of the finished product water and the incoming water. Line 1 is the source water TDS, and line 2 is finished product water TDS that has been purified and remineralized.
From this screen you can turn your water system on and off, view incoming water PSI, outgoing water PSI, holding tank level, alarm codes, configure the desired remineralization settings, and view the runtime hours on each filter and other components.
This turns off the power to the entire unit for repairs or servicing.
This flow meter lets you see what the waste off the reverse osmosis. You can also use this meter balance the flow of product and concentrate flows.
This flow meter lets you see what the product water flow is going into the holding tank. You can also use this meter balance the flow of product and concentrate flows.
The booster pump lets the water system work in lower than average flow environments and controls the incoming water flow. The PSI after the booster pump is customizable, recommending 160-190 PSI to have an efficient reverse osmosis.
The Ultraviolet Sterilizer on the unit is designed to effectively kill any bacteria that may be present in the water flowing from the unit. Because there is no chlorine or other disinfectants in the purified water, it is necessary to ensure that the water is bacteria free leaving the storage tank.
The Grundfos repressurization pump is a self-contained unit that has the ability to flow from very small flows to large volume with no outside storage or control.
The patented bypass system is designed to allow filtered dechlorinated water to be directed into the equipment supply line in the unlikely event the unit malfunctions. The unit will go into bypass only if the tank level is low, or if the repressurization pump fails to run. When any of these conditions happen, the bypass unit will energize and the corresponding warning indicators will show on the monitor to indicate that the unit is in bypass, and which system has faulted.
The storage tank on this unit is a 200 gallon capacity polyethylene tank. It is designed to be trouble and maintenance free.
The 7 step water treatment process strips water of impurities, chemicals and other harmful toxins. Our customized mineral injection then allows for customizable pH and remineralization of the purified water. Unlike other Water treatment systems or bottled water the water treatment system gives you real time information about your water thoughout the whole treatment process
Most bottled water comes from a municipal supply. The water is treated, purified and sold to you, often at a thousandfold increase in price. With no customizable pH or remineralization. Water bottles are recyclable, however 3 out of 4 bottles are sent to the landfill. When you factor in the cost to you and the environment, Our water treatment system is the clear choice its safer for the environment, and easier on your budget.
Brad was raised in Southern Colorado with agriculture roots and has always appreciated the value of water and the life giving resource that it is. Several years ago his family moved to an area with less than desirable drinking water and began to discover ways of making healthy water. For the better part of the last decade Brad and his family have been serving thousands of customers in Colorado with excellent drinking water. He has a passion for purified water and is always looking for ways to add value to the industry and his customers. He loves providing new and innovate products to meet the varying needs within water purification and understands the value of a sustainable world. When Brad is not getting his hands wet you can find him with his family in the mountains, coaching his children’s sports teams, fishing, riding horses or riding a zip line.
Ryan was raised in Northern Colorado with engineering roots. He started programing software in high school. Once he graduated, Ryan then started his own computer engineering firm. That would help residential and commercial companies with computer problems, websites, and custom applications for all operating systems and servers. For a good part of the last decade Ryan has been building and designing custom machinery and automation for industries such as medical, oil and water. His passion for automation and technology has strengthen the companies that he’s helped and get a competitive edge over the competition. His innovation led him to Water Dynamix and the benefits of water purification and the importance that comes with it.